ANOGUARD Technology
43 Waterfall Drive
Jerrabomberra NSW 2619

Phone (02) 6255 9748
Mobile 0417 491 343

International:
Ph: +612 6255 9748
Mobile +61 417 491 343

To send us an email, please click HERE

Anoguard Technology

Ano-Guard Sacrificial Anodes

A CASE HISTORY


The following photos are of stock troughs in the Northern South Australian area, approximately 4-5 years old which had suddenly started to experience general corrosion prematurely. It is believed that the manufacturer had been supplied material with faulty galvanising, however the following serves to demonstrate the effectiveness and efficiency of Ano-Guard sacrificial anodes in rural applications.

After the corrosion was established, several of the troughs had sacrificial anodes fitted and on these the corrosion was completely halted within a matter of weeks. The pitting of course is still apparent.

The water level was lowered for photographic clarity thus the suspended anode would normally be submerged. The total elimination of corrosion is quite apparent although the pitting, of course, remains. The anode is now approximately 2/3 of its original diameter.

We do not recommend that anodes be used to clear and manage existing corrosion, although they will do this very effectively, however it may not be cost effective.

Rather, they should be used to monitor and prevent corrosion with a surface coating acting as the primary barrier.

 

For further product details and your nearest stockist contact John Watts at-


Ano-Guard Technology, 7 Deakin Way Wahroonga NSW 2076
Ph: (02) 9489 1486 Fax: (02) 9489 6648 Email. To send us an email, please click HERE

Home Page

This site is regularly updated
Bookmark Us